Analiza uspešnosti metode PPP ob uporabi storitve IGS v realnem času

Performance analysis of PPP positioning method by using IGS real-time service

Author(s):

Tatjana Kuzmić, Vladimir Bulatović

Abstract:

There are many positioning methods based on the usage of GNSS (Global Navigation Satellite System). They are classified according to the accuracy they can achieve, the time needed to obtain fixed solutions and the concept of positioning - number of used receivers, type of measurement, type of GNSS system, etc. One of the most important ways to do this is PPP (Precise Point Positioning) method, primarily because of its simplicity and cost-effectiveness. The paper describes PPP positioning method, its advantages and limitations, as well as the errors that can occur. It also provides an analysis of the performance of PPP method - precision, convergence time, loss of data reception, repeatability of positioning results and accuracy based on three measurement series in duration of 4 hours each, conducted on different days. By comparing the obtained coordinates with reference ones determined by AUSPOS web service, it can be concluded that the difference between these two sets of coordinates varies from 1 cm to 7 cm, while the accuracy of measured height is lower and the difference varies from 7 cm to 20 cm.

Keywords:

PPP, GPS, GNSS, accuracy, IGS

DOI: 10.15292/geodetski-vestnik.2018.04.604-618

Citation:

Tatjana Kuzmić, Vladimir Bulatović (2018). Analiza uspešnosti metode PPP ob uporabi storitve IGS v realnem času. | Performance analysis of PPP positioning method by using IGS real-time service. Geodetski vestnik, 62 (4), 604-618. DOI: 10.15292/geodetski-vestnik.2018.04.604-618